Parking Lots and Driveway Resurfacing

- Inspect all surfaces and identify all troubled spots like low areas and heavily cracked asphalt in parking lots or road. We apply asphalt glue to the surfaces to ensure proper bonding. Resurface areas to meet existing grades. The areas of sub base failure will be saw cut and removed from parking lot or roadway.

- Excavating the sub base and rebuild with 12" of new 3/4 crushed stone compacted. We will re-pave areas with heavy duty asphalt 2" HL8 and 2" HL3 to meet existing grades before we resurface parking lot or roadways.

- Where applicable, grind all high spots using a rotto mill and/or saw cut and remove dirt where necessary. This will ensure a smoother even surface when joining the asphalt to adjacent perimeters. This also will prevent the asphalt to separate and eliminate any possible tripping points.

- Once all the main preparing is complete, we power clean the entire parking lot or roadway, just like you would see on municipal roads, with street sweepers or industrial blowers, depending on how dirty the surfaces are. This will insure the asphalt to bond to the surfaces, once the asphalt glue is applied.

- When all surfaces are completely dry and cleaned, we apply a bonding agent which is called SS-1 Tack Coat Asphalt Glue to the surfaces with a special spray wand system to ensure a proper even coat.

- We start the resurfacing procedures. Depending on the elevations dealing with, in most cases we will resurfacing areas with 1" 1/2 to 2" of HL3 Highway High Stability Mix. This is a highway roadway surface mix. A highly recommended resurfacing asphalt.

To see if parking lot resurfacing or roadway resurfacing is for you call us anytime. We believe in using top quality materials to ensure a longer lasting pavement.